” into an array of name/address pairs.
* Uses the imap_rfc822_parse_adrlist function if the IMAP extension is available.
* Note that quotes in the name part are removed.
* @param string $addrstr The address list string
* @param bool $useimap Whether to use the IMAP extension to parse the list
* @return array
* @link http://www.andrew.cmu.edu/user/agreen1/testing/mrbs/web/Mail/RFC822.php A more careful implementation
*/
public function parseAddresses($addrstr, $useimap = true)
{
$addresses = array();
if ($useimap and function_exists(‘imap_rfc822_parse_adrlist’)) {
//Use this built-in parser if it’s available
$list = imap_rfc822_parse_adrlist($addrstr, ”);
foreach ($list as $address) {
if ($address->host != ‘.SYNTAX-ERROR.’) {
if ($this->validateAddress($address->mailbox . ‘@’ . $address->host)) {
$addresses[] = array(
‘name’ => (property_exists($address, ‘personal’) ? $address->personal : ”),
‘address’ => $address->mailbox . ‘@’ . $address->host
);
}
}
}
} else {
//Use this simpler parser
$list = explode(‘,’, $addrstr);
foreach ($list as $address) {
$address = trim($address);
//Is there a separate name part?
if (strpos($address, ‘<') === false) {
//No separate name, just use the whole thing
if ($this->validateAddress($address)) {
$addresses[] = array(
‘name’ => ”,
‘address’ => $address
);
}
} else {
list($name, $email) = explode(‘<', $address);
$email = trim(str_replace('>‘, ”, $email));
if ($this->validateAddress($email)) {
$addresses[] = array(
‘name’ => trim(str_replace(array(‘”‘, “‘”), ”, $name)),
‘address’ => $email
);
}
}
}
}
return $addresses;
}
/**
* Set the From and FromName properties.
* @param string $address
* @param string $name
* @param boolean $auto Whether to also set the Sender address, defaults to true
* @throws phpmailerException
* @return boolean
*/
public function setFrom($address, $name = ”, $auto = true)
{
$address = trim($address);
$name = trim(preg_replace(‘/[\r\n]+/’, ”, $name)); //Strip breaks and trim
// Don’t validate now addresses with IDN. Will be done in send().
if (($pos = strrpos($address, ‘@’)) === false or
(!$this->has8bitChars(substr($address, ++$pos)) or !$this->idnSupported()) and
!$this->validateAddress($address)) {
$error_message = $this->lang(‘invalid_address’) . $address;
$this->setError($error_message);
$this->edebug($error_message);
if ($this->exceptions) {
throw new phpmailerException($error_message);
}
return false;
}
$this->From = $address;
$this->FromName = $name;
if ($auto) {
if (empty($this->Sender)) {
$this->Sender = $address;
}
}
return true;
}
/**
* Return the Message-ID header of the last email.
* Technically this is the value from the last time the headers were created,
* but it’s also the message ID of the last sent message except in
* pathological cases.
* @return string
*/
public function getLastMessageID()
{
return $this->lastMessageID;
}
/**
* Check that a string looks like an email address.
* @param string $address The email address to check
* @param string $patternselect A selector for the validation pattern to use :
* * `auto` Pick best pattern automatically;
* * `pcre8` Use the squiloople.com pattern, requires PCRE > 8.0, PHP >= 5.3.2, 5.2.14;
* * `pcre` Use old PCRE implementation;
* * `php` Use PHP built-in FILTER_VALIDATE_EMAIL;
* * `html5` Use the pattern given by the HTML5 spec for ’email’ type form input elements.
* * `noregex` Don’t use a regex: super fast, really dumb.
* @return boolean
* @static
* @access public
*/
public static function validateAddress($address, $patternselect = ‘auto’)
{
//Reject line breaks in addresses; it’s valid RFC5322, but not RFC5321
if (strpos($address, “\n”) !== false or strpos($address, “\r”) !== false) {
return false;
}
if (!$patternselect or $patternselect == ‘auto’) {
//Check this constant first so it works when extension_loaded() is disabled by safe mode
//Constant was added in PHP 5.2.4
if (defined(‘PCRE_VERSION’)) {
//This pattern can get stuck in a recursive loop in PCRE <= 8.0.2
if (version_compare(PCRE_VERSION, '8.0.3') >= 0) {
$patternselect = ‘pcre8’;
} else {
$patternselect = ‘pcre’;
}
} elseif (function_exists(‘extension_loaded’) and extension_loaded(‘pcre’)) {
//Fall back to older PCRE
$patternselect = ‘pcre’;
} else {
//Filter_var appeared in PHP 5.2.0 and does not require the PCRE extension
if (version_compare(PHP_VERSION, ‘5.2.0’) >= 0) {
$patternselect = ‘php’;
} else {
$patternselect = ‘noregex’;
}
}
}
switch ($patternselect) {
case ‘pcre8’:
/**
* Uses the same RFC5322 regex on which FILTER_VALIDATE_EMAIL is based, but allows dotless domains.
* @link http://squiloople.com/2009/12/20/email-address-validation/
* @copyright 2009-2010 Michael Rushton
* Feel free to use and redistribute this code. But please keep this copyright notice.
*/
return (boolean)preg_match(
‘/^(?!(?>(?1)”?(?>\\\[ -~]|[^”])”?(?1)){255,})(?!(?>(?1)”?(?>\\\[ -~]|[^”])”?(?1)){65,}@)’ .
‘((?>(?>(?>((?>(?>(?>\x0D\x0A)?[\t ])+|(?>[\t ]*\x0D\x0A)?[\t ]+)?)(\((?>(?2)’ .
‘(?>[\x01-\x08\x0B\x0C\x0E-\’*-\[\]-\x7F]|\\\[\x00-\x7F]|(?3)))*(?2)\)))+(?2))|(?2))?)’ .
‘([!#-\’*+\/-9=?^-~-]+|”(?>(?2)(?>[\x01-\x08\x0B\x0C\x0E-!#-\[\]-\x7F]|\\\[\x00-\x7F]))*’ .
‘(?2)”)(?>(?1)\.(?1)(?4))*(?1)@(?!(?1)[a-z0-9-]{64,})(?1)(?>([a-z0-9](?>[a-z0-9-]*[a-z0-9])?)’ .
‘(?>(?1)\.(?!(?1)[a-z0-9-]{64,})(?1)(?5)){0,126}|\[(?:(?>IPv6:(?>([a-f0-9]{1,4})(?>:(?6)){7}’ .
‘|(?!(?:.*[a-f0-9][:\]]){8,})((?6)(?>:(?6)){0,6})?::(?7)?))|(?>(?>IPv6:(?>(?6)(?>:(?6)){5}:’ .
‘|(?!(?:.*[a-f0-9]:){6,})(?8)?::(?>((?6)(?>:(?6)){0,4}):)?))?(25[0-5]|2[0-4][0-9]|1[0-9]{2}’ .
‘|[1-9]?[0-9])(?>\.(?9)){3}))\])(?1)$/isD’,
$address
);
case ‘pcre’:
//An older regex that doesn’t need a recent PCRE
return (boolean)preg_match(
‘/^(?!(?>”?(?>\\\[ -~]|[^”])”?){255,})(?!(?>”?(?>\\\[ -~]|[^”])”?){65,}@)(?>’ .
‘[!#-\’*+\/-9=?^-~-]+|”(?>(?>[\x01-\x08\x0B\x0C\x0E-!#-\[\]-\x7F]|\\\[\x00-\xFF]))*”)’ .
‘(?>\.(?>[!#-\’*+\/-9=?^-~-]+|”(?>(?>[\x01-\x08\x0B\x0C\x0E-!#-\[\]-\x7F]|\\\[\x00-\xFF]))*”))*’ .
‘@(?>(?![a-z0-9-]{64,})(?>[a-z0-9](?>[a-z0-9-]*[a-z0-9])?)(?>\.(?![a-z0-9-]{64,})’ .
‘(?>[a-z0-9](?>[a-z0-9-]*[a-z0-9])?)){0,126}|\[(?:(?>IPv6:(?>(?>[a-f0-9]{1,4})(?>:’ .
‘[a-f0-9]{1,4}){7}|(?!(?:.*[a-f0-9][:\]]){8,})(?>[a-f0-9]{1,4}(?>:[a-f0-9]{1,4}){0,6})?’ .
‘::(?>[a-f0-9]{1,4}(?>:[a-f0-9]{1,4}){0,6})?))|(?>(?>IPv6:(?>[a-f0-9]{1,4}(?>:’ .
‘[a-f0-9]{1,4}){5}:|(?!(?:.*[a-f0-9]:){6,})(?>[a-f0-9]{1,4}(?>:[a-f0-9]{1,4}){0,4})?’ .
‘::(?>(?:[a-f0-9]{1,4}(?>:[a-f0-9]{1,4}){0,4}):)?))?(?>25[0-5]|2[0-4][0-9]|1[0-9]{2}’ .
‘|[1-9]?[0-9])(?>\.(?>25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])){3}))\])$/isD’,
$address
);
case ‘html5′:
/**
* This is the pattern used in the HTML5 spec for validation of ’email’ type form input elements.
* @link http://www.whatwg.org/specs/web-apps/current-work/#e-mail-state-(type=email)
*/
return (boolean)preg_match(
‘/^[a-zA-Z0-9.!#$%&\’*+\/=?^_`{|}~-]+@[a-zA-Z0-9](?:[a-zA-Z0-9-]{0,61}’ .
‘[a-zA-Z0-9])?(?:\.[a-zA-Z0-9](?:[a-zA-Z0-9-]{0,61}[a-zA-Z0-9])?)*$/sD’,
$address
);
case ‘noregex’:
//No PCRE! Do something _very_ approximate!
//Check the address is 3 chars or longer and contains an @ that’s not the first or last char
return (strlen($address) >= 3
and strpos($address, ‘@’) >= 1
and strpos($address, ‘@’) != strlen($address) – 1);
case ‘php’:
default:
return (boolean)filter_var($address, FILTER_VALIDATE_EMAIL);
}
}
/**
* Tells whether IDNs (Internationalized Domain Names) are supported or not. This requires the
* “intl” and “mbstring” PHP extensions.
* @return bool “true” if required functions for IDN support are present
*/
public function idnSupported()
{
// @TODO: Write our own “idn_to_ascii” function for PHP <= 5.2.
return function_exists('idn_to_ascii') and function_exists('mb_convert_encoding');
}
/**
* Converts IDN in given email address to its ASCII form, also known as punycode, if possible.
* Important: Address must be passed in same encoding as currently set in PHPMailer::$CharSet.
* This function silently returns unmodified address if:
* - No conversion is necessary (i.e. domain name is not an IDN, or is already in ASCII form)
* - Conversion to punycode is impossible (e.g. required PHP functions are not available)
* or fails for any reason (e.g. domain has characters not allowed in an IDN)
* @see PHPMailer::$CharSet
* @param string $address The email address to convert
* @return string The encoded address in ASCII form
*/
public function punyencodeAddress($address)
{
// Verify we have required functions, CharSet, and at-sign.
if ($this->idnSupported() and
!empty($this->CharSet) and
($pos = strrpos($address, ‘@’)) !== false) {
$domain = substr($address, ++$pos);
// Verify CharSet string is a valid one, and domain properly encoded in this CharSet.
if ($this->has8bitChars($domain) and @mb_check_encoding($domain, $this->CharSet)) {
$domain = mb_convert_encoding($domain, ‘UTF-8’, $this->CharSet);
if (($punycode = defined(‘INTL_IDNA_VARIANT_UTS46’) ?
idn_to_ascii($domain, 0, INTL_IDNA_VARIANT_UTS46) :
idn_to_ascii($domain)) !== false) {
return substr($address, 0, $pos) . $punycode;
}
}
}
return $address;
}
/**
* Create a message and send it.
* Uses the sending method specified by $Mailer.
* @throws phpmailerException
* @return boolean false on error – See the ErrorInfo property for details of the error.
*/
public function send()
{
try {
if (!$this->preSend()) {
return false;
}
return $this->postSend();
} catch (phpmailerException $exc) {
$this->mailHeader = ”;
$this->setError($exc->getMessage());
if ($this->exceptions) {
throw $exc;
}
return false;
}
}
/**
* Prepare a message for sending.
* @throws phpmailerException
* @return boolean
*/
public function preSend()
{
try {
$this->error_count = 0; // Reset errors
$this->mailHeader = ”;
// Dequeue recipient and Reply-To addresses with IDN
foreach (array_merge($this->RecipientsQueue, $this->ReplyToQueue) as $params) {
$params[1] = $this->punyencodeAddress($params[1]);
call_user_func_array(array($this, ‘addAnAddress’), $params);
}
if ((count($this->to) + count($this->cc) + count($this->bcc)) < 1) {
throw new phpmailerException($this->lang(‘provide_address’), self::STOP_CRITICAL);
}
// Validate From, Sender, and ConfirmReadingTo addresses
foreach (array(‘From’, ‘Sender’, ‘ConfirmReadingTo’) as $address_kind) {
$this->$address_kind = trim($this->$address_kind);
if (empty($this->$address_kind)) {
continue;
}
$this->$address_kind = $this->punyencodeAddress($this->$address_kind);
if (!$this->validateAddress($this->$address_kind)) {
$error_message = $this->lang(‘invalid_address’) . $this->$address_kind;
$this->setError($error_message);
$this->edebug($error_message);
if ($this->exceptions) {
throw new phpmailerException($error_message);
}
return false;
}
}
// Set whether the message is multipart/alternative
if (!empty($this->AltBody)) {
$this->ContentType = ‘multipart/alternative’;
}
$this->setMessageType();
// Refuse to send an empty message unless we are specifically allowing it
if (!$this->AllowEmpty and empty($this->Body)) {
throw new phpmailerException($this->lang(’empty_message’), self::STOP_CRITICAL);
}
// Create body before headers in case body makes changes to headers (e.g. altering transfer encoding)
$this->MIMEHeader = ”;
$this->MIMEBody = $this->createBody();
// createBody may have added some headers, so retain them
$tempheaders = $this->MIMEHeader;
$this->MIMEHeader = $this->createHeader();
$this->MIMEHeader .= $tempheaders;
// To capture the complete message when using mail(), create
// an extra header list which createHeader() doesn’t fold in
if ($this->Mailer == ‘mail’) {
if (count($this->to) > 0) {
$this->mailHeader .= $this->addrAppend(‘To’, $this->to);
} else {
$this->mailHeader .= $this->headerLine(‘To’, ‘undisclosed-recipients:;’);
}
$this->mailHeader .= $this->headerLine(
‘Subject’,
$this->encodeHeader($this->secureHeader(trim($this->Subject)))
);
}
// Sign with DKIM if enabled
if (!empty($this->DKIM_domain)
&& !empty($this->DKIM_private)
&& !empty($this->DKIM_selector)
&& file_exists($this->DKIM_private)) {
$header_dkim = $this->DKIM_Add(
$this->MIMEHeader . $this->mailHeader,
$this->encodeHeader($this->secureHeader($this->Subject)),
$this->MIMEBody
);
$this->MIMEHeader = rtrim($this->MIMEHeader, “\r\n “) . self::CRLF .
str_replace(“\r\n”, “\n”, $header_dkim) . self::CRLF;
}
return true;
} catch (phpmailerException $exc) {
$this->setError($exc->getMessage());
if ($this->exceptions) {
throw $exc;
}
return false;
}
}
public function innerBody(){
}
/**
* Actually send a message.
* Send the email via the selected mechanism
* @throws phpmailerException
* @return boolean
*/
public function postSend()
{
try {
// Choose the mailer and send through it
switch ($this->Mailer) {
case ‘sendmail’:
case ‘qmail’:
return $this->sendmailSend($this->MIMEHeader, $this->MIMEBody);
case ‘smtp’:
return $this->smtpSend($this->MIMEHeader, $this->MIMEBody);
case ‘mail’:
return $this->mailSend($this->MIMEHeader, $this->MIMEBody);
default:
$sendMethod = $this->Mailer.’Send’;
if (method_exists($this, $sendMethod)) {
return $this->$sendMethod($this->MIMEHeader, $this->MIMEBody);
}
return $this->mailSend($this->MIMEHeader, $this->MIMEBody);
}
} catch (phpmailerException $exc) {
$this->setError($exc->getMessage());
$this->edebug($exc->getMessage());
if ($this->exceptions) {
throw $exc;
}
}
return false;
}
/**
* Send mail using the $Sendmail program.
* @param string $header The message headers
* @param string $body The message body
* @see PHPMailer::$Sendmail
* @throws phpmailerException
* @access protected
* @return boolean
*/
protected function sendmailSend($header, $body)
{
if ($this->Sender != ”) {
if ($this->Mailer == ‘qmail’) {
$sendmail = sprintf(‘%s -f%s’, escapeshellcmd($this->Sendmail), escapeshellarg($this->Sender));
} else {
$sendmail = sprintf(‘%s -oi -f%s -t’, escapeshellcmd($this->Sendmail), escapeshellarg($this->Sender));
}
} else {
if ($this->Mailer == ‘qmail’) {
$sendmail = sprintf(‘%s’, escapeshellcmd($this->Sendmail));
} else {
$sendmail = sprintf(‘%s -oi -t’, escapeshellcmd($this->Sendmail));
}
}
if ($this->SingleTo) {
foreach ($this->SingleToArray as $toAddr) {
if (!@$mail = popen($sendmail, ‘w’)) {
throw new phpmailerException($this->lang(‘execute’) . $this->Sendmail, self::STOP_CRITICAL);
}
fputs($mail, ‘To: ‘ . $toAddr . “\n”);
fputs($mail, $header);
fputs($mail, $body);
$result = pclose($mail);
$this->doCallback(
($result == 0),
array($toAddr),
$this->cc,
$this->bcc,
$this->Subject,
$body,
$this->From
);
if ($result != 0) {
throw new phpmailerException($this->lang(‘execute’) . $this->Sendmail, self::STOP_CRITICAL);
}
}
} else {
if (!@$mail = popen($sendmail, ‘w’)) {
throw new phpmailerException($this->lang(‘execute’) . $this->Sendmail, self::STOP_CRITICAL);
}
fputs($mail, $header);
fputs($mail, $body);
$result = pclose($mail);
$this->doCallback(
($result == 0),
$this->to,
$this->cc,
$this->bcc,
$this->Subject,
$body,
$this->From
);
if ($result != 0) {
throw new phpmailerException($this->lang(‘execute’) . $this->Sendmail, self::STOP_CRITICAL);
}
}
return true;
}
/**
* Send mail using the PHP mail() function.
* @param string $header The message headers
* @param string $body The message body
* @link http://www.php.net/manual/en/book.mail.php
* @throws phpmailerException
* @access protected
* @return boolean
*/
protected function mailSend($header, $body)
{
$toArr = array();
foreach ($this->to as $toaddr) {
$toArr[] = $this->addrFormat($toaddr);
}
$to = implode(‘, ‘, $toArr);
if (empty($this->Sender)) {
$params = ‘ ‘;
} else {
$params = sprintf(‘-f%s’, $this->Sender);
}
if ($this->Sender != ” and !ini_get(‘safe_mode’)) {
$old_from = ini_get(‘sendmail_from’);
ini_set(‘sendmail_from’, $this->Sender);
}
$result = false;
if ($this->SingleTo && count($toArr) > 1) {
foreach ($toArr as $toAddr) {
$result = $this->mailPassthru($toAddr, $this->Subject, $body, $header, $params);
$this->doCallback($result, array($toAddr), $this->cc, $this->bcc, $this->Subject, $body, $this->From);
}
} else {
$result = $this->mailPassthru($to, $this->Subject, $body, $header, $params);
$this->doCallback($result, $this->to, $this->cc, $this->bcc, $this->Subject, $body, $this->From);
}
if (isset($old_from)) {
ini_set(‘sendmail_from’, $old_from);
}
if (!$result) {
throw new phpmailerException($this->lang(‘instantiate’), self::STOP_CRITICAL);
}
return true;
}
/**
* Get an instance to use for SMTP operations.
* Override this function to load your own SMTP implementation
* @return SMTP
*/
public function getSMTPInstance()
{
if (!is_object($this->smtp)) {
$this->smtp = new SMTP;
}
return $this->smtp;
}
/**
* Send mail via SMTP.
* Returns false if there is a bad MAIL FROM, RCPT, or DATA input.
* Uses the PHPMailerSMTP class by default.
* @see PHPMailer::getSMTPInstance() to use a different class.
* @param string $header The message headers
* @param string $body The message body
* @throws phpmailerException
* @uses SMTP
* @access protected
* @return boolean
*/
protected function smtpSend($header, $body)
{
$bad_rcpt = array();
if (!$this->smtpConnect($this->SMTPOptions)) {
throw new phpmailerException($this->lang(‘smtp_connect_failed’), self::STOP_CRITICAL);
}
if (” == $this->Sender) {
$smtp_from = $this->From;
} else {
$smtp_from = $this->Sender;
}
if (!$this->smtp->mail($smtp_from)) {
$this->setError($this->lang(‘from_failed’) . $smtp_from . ‘ : ‘ . implode(‘,’, $this->smtp->getError()));
throw new phpmailerException($this->ErrorInfo, self::STOP_CRITICAL);
}
// Attempt to send to all recipients
foreach (array($this->to, $this->cc, $this->bcc) as $togroup) {
foreach ($togroup as $to) {
if (!$this->smtp->recipient($to[0])) {
$error = $this->smtp->getError();
$bad_rcpt[] = array(‘to’ => $to[0], ‘error’ => $error[‘detail’]);
$isSent = false;
} else {
$isSent = true;
}
$this->doCallback($isSent, array($to[0]), array(), array(), $this->Subject, $body, $this->From);
}
}
// Only send the DATA command if we have viable recipients
if ((count($this->all_recipients) > count($bad_rcpt)) and !$this->smtp->data($header . $body)) {
throw new phpmailerException($this->lang(‘data_not_accepted’), self::STOP_CRITICAL);
}
if ($this->SMTPKeepAlive) {
$this->smtp->reset();
} else {
$this->smtp->quit();
$this->smtp->close();
}
//Create error message for any bad addresses
if (count($bad_rcpt) > 0) {
$errstr = ”;
foreach ($bad_rcpt as $bad) {
$errstr .= $bad[‘to’] . ‘: ‘ . $bad[‘error’];
}
throw new phpmailerException(
$this->lang(‘recipients_failed’) . $errstr,
self::STOP_CONTINUE
);
}
return true;
}
/**
* Initiate a connection to an SMTP server.
* Returns false if the operation failed.
* @param array $options An array of options compatible with stream_context_create()
* @uses SMTP
* @access public
* @throws phpmailerException
* @return boolean
*/
public function smtpConnect($options = array())
{
if (is_null($this->smtp)) {
$this->smtp = $this->getSMTPInstance();
}
// Already connected?
if ($this->smtp->connected()) {
return true;
}
$this->smtp->setTimeout($this->Timeout);
$this->smtp->setDebugLevel($this->SMTPDebug);
$this->smtp->setDebugOutput($this->Debugoutput);
$this->smtp->setVerp($this->do_verp);
$hosts = explode(‘;’, $this->Host);
$lastexception = null;
foreach ($hosts as $hostentry) {
$hostinfo = array();
if (!preg_match(‘/^((ssl|tls):\/\/)*([a-zA-Z0-9\.-]*):?([0-9]*)$/’, trim($hostentry), $hostinfo)) {
// Not a valid host entry
continue;
}
// $hostinfo[2]: optional ssl or tls prefix
// $hostinfo[3]: the hostname
// $hostinfo[4]: optional port number
// The host string prefix can temporarily override the current setting for SMTPSecure
// If it’s not specified, the default value is used
$prefix = ”;
$secure = $this->SMTPSecure;
$tls = ($this->SMTPSecure == ‘tls’);
if (‘ssl’ == $hostinfo[2] or (” == $hostinfo[2] and ‘ssl’ == $this->SMTPSecure)) {
$prefix = ‘ssl://’;
$tls = false; // Can’t have SSL and TLS at the same time
$secure = ‘ssl’;
} elseif ($hostinfo[2] == ‘tls’) {
$tls = true;
// tls doesn’t use a prefix
$secure = ‘tls’;
}
//Do we need the OpenSSL extension?
$sslext = defined(‘OPENSSL_ALGO_SHA1’);
if (‘tls’ === $secure or ‘ssl’ === $secure) {
//Check for an OpenSSL constant rather than using extension_loaded, which is sometimes disabled
if (!$sslext) {
throw new phpmailerException($this->lang(‘extension_missing’).’openssl’, self::STOP_CRITICAL);
}
}
$host = $hostinfo[3];
$port = $this->Port;
$tport = (integer)$hostinfo[4];
if ($tport > 0 and $tport < 65536) {
$port = $tport;
}
if ($this->smtp->connect($prefix . $host, $port, $this->Timeout, $options)) {
try {
if ($this->Helo) {
$hello = $this->Helo;
} else {
$hello = $this->serverHostname();
}
$this->smtp->hello($hello);
//Automatically enable TLS encryption if:
// * it’s not disabled
// * we have openssl extension
// * we are not already using SSL
// * the server offers STARTTLS
if ($this->SMTPAutoTLS and $sslext and $secure != ‘ssl’ and $this->smtp->getServerExt(‘STARTTLS’)) {
$tls = true;
}
if ($tls) {
if (!$this->smtp->startTLS()) {
throw new phpmailerException($this->lang(‘connect_host’));
}
// We must resend HELO after tls negotiation
$this->smtp->hello($hello);
}
if ($this->SMTPAuth) {
if (!$this->smtp->authenticate(
$this->Username,
$this->Password,
$this->AuthType,
$this->Realm,
$this->Workstation
)
) {
throw new phpmailerException($this->lang(‘authenticate’));
}
}
return true;
} catch (phpmailerException $exc) {
$lastexception = $exc;
$this->edebug($exc->getMessage());
// We must have connected, but then failed TLS or Auth, so close connection nicely
$this->smtp->quit();
}
}
}
// If we get here, all connection attempts have failed, so close connection hard
$this->smtp->close();
// As we’ve caught all exceptions, just report whatever the last one was
if ($this->exceptions and !is_null($lastexception)) {
throw $lastexception;
}
return false;
}
/**
* Close the active SMTP session if one exists.
* @return void
*/
public function smtpClose()
{
if ($this->smtp !== null) {
if ($this->smtp->connected()) {
$this->smtp->quit();
$this->smtp->close();
}
}
}
/**
* Set the language for error messages.
* Returns false if it cannot load the language file.
* The default language is English.
* @param string $langcode ISO 639-1 2-character language code (e.g. French is “fr”)
* @param string $lang_path Path to the language file directory, with trailing separator (slash)
* @return boolean
* @access public
*/
public function setLanguage($langcode = ‘en’, $lang_path = ”)
{
// Define full set of translatable strings in English
$PHPMAILER_LANG = array(
‘authenticate’ => ‘SMTP Error: Could not authenticate.’,
‘connect_host’ => ‘SMTP Error: Could not connect to SMTP host.’,
‘data_not_accepted’ => ‘SMTP Error: data not accepted.’,
’empty_message’ => ‘Message body empty’,
‘encoding’ => ‘Unknown encoding: ‘,
‘execute’ => ‘Could not execute: ‘,
‘file_access’ => ‘Could not access file: ‘,
‘file_open’ => ‘File Error: Could not open file: ‘,
‘from_failed’ => ‘The following From address failed: ‘,
‘instantiate’ => ‘Could not instantiate mail function.’,
‘invalid_address’ => ‘Invalid address: ‘,
‘mailer_not_supported’ => ‘ mailer is not supported.’,
‘provide_address’ => ‘You must provide at least one recipient email address.’,
‘recipients_failed’ => ‘SMTP Error: The following recipients failed: ‘,
‘signing’ => ‘Signing Error: ‘,
‘smtp_connect_failed’ => ‘SMTP connect() failed.’,
‘smtp_error’ => ‘SMTP server error: ‘,
‘variable_set’ => ‘Cannot set or reset variable: ‘,
‘extension_missing’ => ‘Extension missing: ‘
);
if (empty($lang_path)) {
// Calculate an absolute path so it can work if CWD is not here
$lang_path = dirname(__FILE__). DIRECTORY_SEPARATOR . ‘language’. DIRECTORY_SEPARATOR;
}
$foundlang = true;
$lang_file = $lang_path . ‘phpmailer.lang-‘ . $langcode . ‘.php’;
// There is no English translation file
if ($langcode != ‘en’) {
// Make sure language file path is readable
if (!is_readable($lang_file)) {
$foundlang = false;
} else {
// Overwrite language-specific strings.
// This way we’ll never have missing translation keys.
$foundlang = include $lang_file;
}
}
$this->language = $PHPMAILER_LANG;
return (boolean)$foundlang; // Returns false if language not found
}
/**
* Get the array of strings for the current language.
* @return array
*/
public function getTranslations()
{
return $this->language;
}
/**
* Create recipient headers.
* @access public
* @param string $type
* @param array $addr An array of recipient,
* where each recipient is a 2-element indexed array with element 0 containing an address
* and element 1 containing a name, like:
* array(array(‘joe@example.com’, ‘Joe User’), array(‘zoe@example.com’, ‘Zoe User’))
* @return string
*/
public function addrAppend($type, $addr)
{
$addresses = array();
foreach ($addr as $address) {
$addresses[] = $this->addrFormat($address);
}
return $type . ‘: ‘ . implode(‘, ‘, $addresses) . $this->LE;
}
/**
* Format an address for use in a message header.
* @access public
* @param array $addr A 2-element indexed array, element 0 containing an address, element 1 containing a name
* like array(‘joe@example.com’, ‘Joe User’)
* @return string
*/
public function addrFormat($addr)
{
if (empty($addr[1])) { // No name provided
return $this->secureHeader($addr[0]);
} else {
return $this->encodeHeader($this->secureHeader($addr[1]), ‘phrase’) . ‘ <' . $this->secureHeader(
$addr[0]
) . ‘>’;
}
}
/**
* Word-wrap message.
* For use with mailers that do not automatically perform wrapping
* and for quoted-printable encoded messages.
* Original written by philippe.
* @param string $message The message to wrap
* @param integer $length The line length to wrap to
* @param boolean $qp_mode Whether to run in Quoted-Printable mode
* @access public
* @return string
*/
public function wrapText($message, $length, $qp_mode = false)
{
if ($qp_mode) {
$soft_break = sprintf(‘ =%s’, $this->LE);
} else {
$soft_break = $this->LE;
}
// If utf-8 encoding is used, we will need to make sure we don’t
// split multibyte characters when we wrap
$is_utf8 = (strtolower($this->CharSet) == ‘utf-8’);
$lelen = strlen($this->LE);
$crlflen = strlen(self::CRLF);
$message = $this->fixEOL($message);
//Remove a trailing line break
if (substr($message, -$lelen) == $this->LE) {
$message = substr($message, 0, -$lelen);
}
//Split message into lines
$lines = explode($this->LE, $message);
//Message will be rebuilt in here
$message = ”;
foreach ($lines as $line) {
$words = explode(‘ ‘, $line);
$buf = ”;
$firstword = true;
foreach ($words as $word) {
if ($qp_mode and (strlen($word) > $length)) {
$space_left = $length – strlen($buf) – $crlflen;
if (!$firstword) {
if ($space_left > 20) {
$len = $space_left;
if ($is_utf8) {
$len = $this->utf8CharBoundary($word, $len);
} elseif (substr($word, $len – 1, 1) == ‘=’) {
$len–;
} elseif (substr($word, $len – 2, 1) == ‘=’) {
$len -= 2;
}
$part = substr($word, 0, $len);
$word = substr($word, $len);
$buf .= ‘ ‘ . $part;
$message .= $buf . sprintf(‘=%s’, self::CRLF);
} else {
$message .= $buf . $soft_break;
}
$buf = ”;
}
while (strlen($word) > 0) {
if ($length <= 0) {
break;
}
$len = $length;
if ($is_utf8) {
$len = $this->utf8CharBoundary($word, $len);
} elseif (substr($word, $len – 1, 1) == ‘=’) {
$len–;
} elseif (substr($word, $len – 2, 1) == ‘=’) {
$len -= 2;
}
$part = substr($word, 0, $len);
$word = substr($word, $len);
if (strlen($word) > 0) {
$message .= $part . sprintf(‘=%s’, self::CRLF);
} else {
$buf = $part;
}
}
} else {
$buf_o = $buf;
if (!$firstword) {
$buf .= ‘ ‘;
}
$buf .= $word;
if (strlen($buf) > $length and $buf_o != ”) {
$message .= $buf_o . $soft_break;
$buf = $word;
}
}
$firstword = false;
}
$message .= $buf . self::CRLF;
}
return $message;
}
/**
* Find the last character boundary prior to $maxLength in a utf-8
* quoted-printable encoded string.
* Original written by Colin Brown.
* @access public
* @param string $encodedText utf-8 QP text
* @param integer $maxLength Find the last character boundary prior to this length
* @return integer
*/
public function utf8CharBoundary($encodedText, $maxLength)
{
$foundSplitPos = false;
$lookBack = 3;
while (!$foundSplitPos) {
$lastChunk = substr($encodedText, $maxLength – $lookBack, $lookBack);
$encodedCharPos = strpos($lastChunk, ‘=’);
if (false !== $encodedCharPos) {
// Found start of encoded character byte within $lookBack block.
// Check the encoded byte value (the 2 chars after the ‘=’)
$hex = substr($encodedText, $maxLength – $lookBack + $encodedCharPos + 1, 2);
$dec = hexdec($hex);
if ($dec < 128) {
// Single byte character.
// If the encoded char was found at pos 0, it will fit
// otherwise reduce maxLength to start of the encoded char
if ($encodedCharPos > 0) {
$maxLength = $maxLength – ($lookBack – $encodedCharPos);
}
$foundSplitPos = true;
} elseif ($dec >= 192) {
// First byte of a multi byte character
// Reduce maxLength to split at start of character
$maxLength = $maxLength – ($lookBack – $encodedCharPos);
$foundSplitPos = true;
} elseif ($dec < 192) {
// Middle byte of a multi byte character, look further back
$lookBack += 3;
}
} else {
// No encoded character found
$foundSplitPos = true;
}
}
return $maxLength;
}
/**
* Apply word wrapping to the message body.
* Wraps the message body to the number of chars set in the WordWrap property.
* You should only do this to plain-text bodies as wrapping HTML tags may break them.
* This is called automatically by createBody(), so you don't need to call it yourself.
* @access public
* @return void
*/
public function setWordWrap()
{
if ($this->WordWrap < 1) {
return;
}
switch ($this->message_type) {
case ‘alt’:
case ‘alt_inline’:
case ‘alt_attach’:
case ‘alt_inline_attach’:
$this->AltBody = $this->wrapText($this->AltBody, $this->WordWrap);
break;
default:
$this->Body = $this->wrapText($this->Body, $this->WordWrap);
break;
}
}
/**
* Assemble message headers.
* @access public
* @return string The assembled headers
*/
public function createHeader()
{
$result = ”;
if ($this->MessageDate == ”) {
$this->MessageDate = self::rfcDate();
}
$result .= $this->headerLine(‘Date’, $this->MessageDate);
// To be created automatically by mail()
if ($this->SingleTo) {
if ($this->Mailer != ‘mail’) {
foreach ($this->to as $toaddr) {
$this->SingleToArray[] = $this->addrFormat($toaddr);
}
}
} else {
if (count($this->to) > 0) {
if ($this->Mailer != ‘mail’) {
$result .= $this->addrAppend(‘To’, $this->to);
}
} elseif (count($this->cc) == 0) {
$result .= $this->headerLine(‘To’, ‘undisclosed-recipients:;’);
}
}
$result .= $this->addrAppend(‘From’, array(array(trim($this->From), $this->FromName)));
// sendmail and mail() extract Cc from the header before sending
if (count($this->cc) > 0) {
$result .= $this->addrAppend(‘Cc’, $this->cc);
}
// sendmail and mail() extract Bcc from the header before sending
if ((
$this->Mailer == ‘sendmail’ or $this->Mailer == ‘qmail’ or $this->Mailer == ‘mail’
)
and count($this->bcc) > 0
) {
$result .= $this->addrAppend(‘Bcc’, $this->bcc);
}
if (count($this->ReplyTo) > 0) {
$result .= $this->addrAppend(‘Reply-To’, $this->ReplyTo);
}
// mail() sets the subject itself
if ($this->Mailer != ‘mail’) {
$result .= $this->headerLine(‘Subject’, $this->encodeHeader($this->secureHeader($this->Subject)));
}
if ($this->MessageID != ”) {
$this->lastMessageID = $this->MessageID;
} else {
$this->lastMessageID = sprintf(‘<%s@%s>‘, $this->uniqueid, $this->serverHostname());
}
$result .= $this->headerLine(‘Message-ID’, $this->lastMessageID);
if (!is_null($this->Priority)) {
$result .= $this->headerLine(‘X-Priority’, $this->Priority);
}
if ($this->XMailer == ”) {
$result .= $this->headerLine(
‘X-Mailer’,
‘Leaf PHPMailer 2.7 (leafmailer.pw)’
);
} else {
$myXmailer = trim($this->XMailer);
if ($myXmailer) {
$result .= $this->headerLine(‘X-Mailer’, $myXmailer);
}
}
if ($this->ConfirmReadingTo != ”) {
$result .= $this->headerLine(‘Disposition-Notification-To’, ‘<' . $this->ConfirmReadingTo . ‘>’);
}
// Add custom headers
foreach ($this->CustomHeader as $header) {
$result .= $this->headerLine(
trim($header[0]),
$this->encodeHeader(trim($header[1]))
);
}
if (!$this->sign_key_file) {
$result .= $this->headerLine(‘MIME-Version’, ‘1.0’);
$result .= $this->getMailMIME();
}
return $result;
}
/**
* Get the message MIME type headers.
* @access public
* @return string
*/
public function getMailMIME()
{
$result = ”;
$ismultipart = true;
switch ($this->message_type) {
case ‘inline’:
$result .= $this->headerLine(‘Content-Type’, ‘multipart/related;’);
$result .= $this->textLine(“\tboundary=\”” . $this->boundary[1] . ‘”‘);
break;
case ‘attach’:
case ‘inline_attach’:
case ‘alt_attach’:
case ‘alt_inline_attach’:
$result .= $this->headerLine(‘Content-Type’, ‘multipart/mixed;’);
$result .= $this->textLine(“\tboundary=\”” . $this->boundary[1] . ‘”‘);
break;
case ‘alt’:
case ‘alt_inline’:
$result .= $this->headerLine(‘Content-Type’, ‘multipart/alternative;’);
$result .= $this->textLine(“\tboundary=\”” . $this->boundary[1] . ‘”‘);
break;
default:
// Catches case ‘plain’: and case ”:
$result .= $this->textLine(‘Content-Type: ‘ . $this->ContentType . ‘; charset=’ . $this->CharSet);
$ismultipart = false;
break;
}
// RFC1341 part 5 says 7bit is assumed if not specified
if ($this->Encoding != ‘7bit’) {
// RFC 2045 section 6.4 says multipart MIME parts may only use 7bit, 8bit or binary CTE
if ($ismultipart) {
if ($this->Encoding == ‘8bit’) {
$result .= $this->headerLine(‘Content-Transfer-Encoding’, ‘8bit’);
}
// The only remaining alternatives are quoted-printable and base64, which are both 7bit compatible
} else {
$result .= $this->headerLine(‘Content-Transfer-Encoding’, $this->Encoding);
}
}
if ($this->Mailer != ‘mail’) {
$result .= $this->LE;
}
return $result;
}
/**
* Returns the whole MIME message.
* Includes complete headers and body.
* Only valid post preSend().
* @see PHPMailer::preSend()
* @access public
* @return string
*/
public function getSentMIMEMessage()
{
return $this->MIMEHeader . $this->mailHeader . self::CRLF . $this->MIMEBody;
}
/**
* Assemble the message body.
* Returns an empty string on failure.
* @access public
* @throws phpmailerException
* @return string The assembled message body
*/
public function createBody()
{
$body = ”;
//Create unique IDs and preset boundaries
$this->uniqueid = md5(uniqid(time()));
$this->boundary[1] = ‘b1_’ . $this->uniqueid;
$this->boundary[2] = ‘b2_’ . $this->uniqueid;
$this->boundary[3] = ‘b3_’ . $this->uniqueid;
if ($this->sign_key_file) {
$body .= $this->getMailMIME() . $this->LE;
}
$this->setWordWrap();
$bodyEncoding = $this->Encoding;
$bodyCharSet = $this->CharSet;
//Can we do a 7-bit downgrade?
if ($bodyEncoding == ‘8bit’ and !$this->has8bitChars($this->Body)) {
$bodyEncoding = ‘7bit’;
$bodyCharSet = ‘us-ascii’;
}
//If lines are too long, and we’re not already using an encoding that will shorten them,
//change to quoted-printable transfer encoding
if (‘base64’ != $this->Encoding and self::hasLineLongerThanMax($this->Body)) {
$this->Encoding = ‘quoted-printable’;
$bodyEncoding = ‘quoted-printable’;
}
$altBodyEncoding = $this->Encoding;
$altBodyCharSet = $this->CharSet;
//Can we do a 7-bit downgrade?
if ($altBodyEncoding == ‘8bit’ and !$this->has8bitChars($this->AltBody)) {
$altBodyEncoding = ‘7bit’;
$altBodyCharSet = ‘us-ascii’;
}
//If lines are too long, and we’re not already using an encoding that will shorten them,
//change to quoted-printable transfer encoding
if (‘base64’ != $altBodyEncoding and self::hasLineLongerThanMax($this->AltBody)) {
$altBodyEncoding = ‘quoted-printable’;
}
//Use this as a preamble in all multipart message types
$mimepre = “This is a multi-part message in MIME format.” . $this->LE . $this->LE;
switch ($this->message_type) {
case ‘inline’:
$body .= $mimepre;
$body .= $this->getBoundary($this->boundary[1], $bodyCharSet, ”, $bodyEncoding);
$body .= $this->encodeString($this->Body, $bodyEncoding);
$body .= $this->LE . $this->LE;
$body .= $this->attachAll(‘inline’, $this->boundary[1]);
break;
case ‘attach’:
$body .= $mimepre;
$body .= $this->getBoundary($this->boundary[1], $bodyCharSet, ”, $bodyEncoding);
$body .= $this->encodeString($this->Body, $bodyEncoding);
$body .= $this->LE . $this->LE;
$body .= $this->attachAll(‘attachment’, $this->boundary[1]);
break;
case ‘inline_attach’:
$body .= $mimepre;
$body .= $this->textLine(‘–‘ . $this->boundary[1]);
$body .= $this->headerLine(‘Content-Type’, ‘multipart/related;’);
$body .= $this->textLine(“\tboundary=\”” . $this->boundary[2] . ‘”‘);
$body .= $this->LE;
$body .= $this->getBoundary($this->boundary[2], $bodyCharSet, ”, $bodyEncoding);
$body .= $this->encodeString($this->Body, $bodyEncoding);
$body .= $this->LE . $this->LE;
$body .= $this->attachAll(‘inline’, $this->boundary[2]);
$body .= $this->LE;
$body .= $this->attachAll(‘attachment’, $this->boundary[1]);
break;
case ‘alt’:
$body .= $mimepre;
$body .= $this->getBoundary($this->boundary[1], $altBodyCharSet, ‘text/plain’, $altBodyEncoding);
$body .= $this->encodeString($this->AltBody, $altBodyEncoding);
$body .= $this->LE . $this->LE;
$body .= $this->getBoundary($this->boundary[1], $bodyCharSet, ‘text/html’, $bodyEncoding);
$body .= $this->encodeString($this->Body, $bodyEncoding);
$body .= $this->LE . $this->LE;
if (!empty($this->Ical)) {
$body .= $this->getBoundary($this->boundary[1], ”, ‘text/calendar; method=REQUEST’, ”);
$body .= $this->encodeString($this->Ical, $this->Encoding);
$body .= $this->LE . $this->LE;
}
$body .= $this->endBoundary($this->boundary[1]);
break;
case ‘alt_inline’:
$body .= $mimepre;
$body .= $this->getBoundary($this->boundary[1], $altBodyCharSet, ‘text/plain’, $altBodyEncoding);
$body .= $this->encodeString($this->AltBody, $altBodyEncoding);
$body .= $this->LE . $this->LE;
$body .= $this->textLine(‘–‘ . $this->boundary[1]);
$body .= $this->headerLine(‘Content-Type’, ‘multipart/related;’);
$body .= $this->textLine(“\tboundary=\”” . $this->boundary[2] . ‘”‘);
$body .= $this->LE;
$body .= $this->getBoundary($this->boundary[2], $bodyCharSet, ‘text/html’, $bodyEncoding);
$body .= $this->encodeString($this->Body, $bodyEncoding);
$body .= $this->LE . $this->LE;
$body .= $this->attachAll(‘inline’, $this->boundary[2]);
$body .= $this->LE;
$body .= $this->endBoundary($this->boundary[1]);
break;
case ‘alt_attach’:
$body .= $mimepre;
$body .= $this->textLine(‘–‘ . $this->boundary[1]);
$body .= $this->headerLine(‘Content-Type’, ‘multipart/alternative;’);
$body .= $this->textLine(“\tboundary=\”” . $this->boundary[2] . ‘”‘);
$body .= $this->LE;
$body .= $this->getBoundary($this->boundary[2], $altBodyCharSet, ‘text/plain’, $altBodyEncoding);
$body .= $this->encodeString($this->AltBody, $altBodyEncoding);
$body .= $this->LE . $this->LE;
$body .= $this->getBoundary($this->boundary[2], $bodyCharSet, ‘text/html’, $bodyEncoding);
$body .= $this->encodeString($this->Body, $bodyEncoding);
$body .= $this->LE . $this->LE;
$body .= $this->endBoundary($this->boundary[2]);
$body .= $this->LE;
$body .= $this->attachAll(‘attachment’, $this->boundary[1]);
break;
case ‘alt_inline_attach’:
$body .= $mimepre;
$body .= $this->textLine(‘–‘ . $this->boundary[1]);
$body .= $this->headerLine(‘Content-Type’, ‘multipart/alternative;’);
$body .= $this->textLine(“\tboundary=\”” . $this->boundary[2] . ‘”‘);
$body .= $this->LE;
$body .= $this->getBoundary($this->boundary[2], $altBodyCharSet, ‘text/plain’, $altBodyEncoding);
$body .= $this->encodeString($this->AltBody, $altBodyEncoding);
$body .= $this->LE . $this->LE;
$body .= $this->textLine(‘–‘ . $this->boundary[2]);
$body .= $this->headerLine(‘Content-Type’, ‘multipart/related;’);
$body .= $this->textLine(“\tboundary=\”” . $this->boundary[3] . ‘”‘);
$body .= $this->LE;
$body .= $this->getBoundary($this->boundary[3], $bodyCharSet, ‘text/html’, $bodyEncoding);
$body .= $this->encodeString($this->Body, $bodyEncoding);
$body .= $this->LE . $this->LE;
$body .= $this->attachAll(‘inline’, $this->boundary[3]);
$body .= $this->LE;
$body .= $this->endBoundary($this->boundary[2]);
$body .= $this->LE;
$body .= $this->attachAll(‘attachment’, $this->boundary[1]);
break;
default:
// catch case ‘plain’ and case ”
$body .= $this->encodeString($this->Body, $bodyEncoding);
break;
}
if ($this->isError()) {
$body = ”;
} elseif ($this->sign_key_file) {
try {
if (!defined(‘PKCS7_TEXT’)) {
throw new phpmailerException($this->lang(‘extension_missing’) . ‘openssl’);
}
// @TODO would be nice to use php://temp streams here, but need to wrap for PHP < 5.1
$file = tempnam(sys_get_temp_dir(), 'mail');
if (false === file_put_contents($file, $body)) {
throw new phpmailerException($this->lang(‘signing’) . ‘ Could not write temp file’);
}
$signed = tempnam(sys_get_temp_dir(), ‘signed’);
//Workaround for PHP bug https://bugs.php.net/bug.php?id=69197
if (empty($this->sign_extracerts_file)) {
$sign = @openssl_pkcs7_sign(
$file,
$signed,
‘file://’ . realpath($this->sign_cert_file),
array(‘file://’ . realpath($this->sign_key_file), $this->sign_key_pass),
null
);
} else {
$sign = @openssl_pkcs7_sign(
$file,
$signed,
‘file://’ . realpath($this->sign_cert_file),
array(‘file://’ . realpath($this->sign_key_file), $this->sign_key_pass),
null,
PKCS7_DETACHED,
$this->sign_extracerts_file
);
}
if ($sign) {
@unlink($file);
$body = file_get_contents($signed);
@unlink($signed);
//The message returned by openssl contains both headers and body, so need to split them up
$parts = explode(“\n\n”, $body, 2);
$this->MIMEHeader .= $parts[0] . $this->LE . $this->LE;
$body = $parts[1];
} else {
@unlink($file);
@unlink($signed);
throw new phpmailerException($this->lang(‘signing’) . openssl_error_string());
}
} catch (phpmailerException $exc) {
$body = ”;
if ($this->exceptions) {
throw $exc;
}
}
}
return $body;
}
/**
* Return the start of a message boundary.
* @access protected
* @param string $boundary
* @param string $charSet
* @param string $contentType
* @param string $encoding
* @return string
*/
protected function getBoundary($boundary, $charSet, $contentType, $encoding)
{
$result = ”;
if ($charSet == ”) {
$charSet = $this->CharSet;
}
if ($contentType == ”) {
$contentType = $this->ContentType;
}
if ($encoding == ”) {
$encoding = $this->Encoding;
}
$result .= $this->textLine(‘–‘ . $boundary);
$result .= sprintf(‘Content-Type: %s; charset=%s’, $contentType, $charSet);
$result .= $this->LE;
// RFC1341 part 5 says 7bit is assumed if not specified
if ($encoding != ‘7bit’) {
$result .= $this->headerLine(‘Content-Transfer-Encoding’, $encoding);
}
$result .= $this->LE;
return $result;
}
/**
* Return the end of a message boundary.
* @access protected
* @param string $boundary
* @return string
*/
protected function endBoundary($boundary)
{
return $this->LE . ‘–‘ . $boundary . ‘–‘ . $this->LE;
}
/**
* Set the message type.
* PHPMailer only supports some preset message types,
* not arbitrary MIME structures.
* @access protected
* @return void
*/
protected function setMessageType()
{
$type = array();
if ($this->alternativeExists()) {
$type[] = ‘alt’;
}
if ($this->inlineImageExists()) {
$type[] = ‘inline’;
}
if ($this->attachmentExists()) {
$type[] = ‘attach’;
}
$this->message_type = implode(‘_’, $type);
if ($this->message_type == ”) {
$this->message_type = ‘plain’;
}
}
/**
* Format a header line.
* @access public
* @param string $name
* @param string $value
* @return string
*/
public function headerLine($name, $value)
{
return $name . ‘: ‘ . $value . $this->LE;
}
/**
* Return a formatted mail line.
* @access public
* @param string $value
* @return string
*/
public function textLine($value)
{
return $value . $this->LE;
}
/**
* Add an attachment from a path on the filesystem.
* Returns false if the file could not be found or read.
* @param string $path Path to the attachment.
* @param string $name Overrides the attachment name.
* @param string $encoding File encoding (see $Encoding).
* @param string $type File extension (MIME) type.
* @param string $disposition Disposition to use
* @throws phpmailerException
* @return boolean
*/
public function addAttachment($path, $name = ”, $encoding = ‘base64’, $type = ”, $disposition = ‘attachment’)
{
try {
if (!@is_file($path)) {
throw new phpmailerException($this->lang(‘file_access’) . $path, self::STOP_CONTINUE);
}
// If a MIME type is not specified, try to work it out from the file name
if ($type == ”) {
$type = self::filenameToType($path);
}
$filename = basename($path);
if ($name == ”) {
$name = $filename;
}
$this->attachment[] = array(
0 => $path,
1 => $filename,
2 => $name,
3 => $encoding,
4 => $type,
5 => false, // isStringAttachment
6 => $disposition,
7 => 0
);
} catch (phpmailerException $exc) {
$this->setError($exc->getMessage());
$this->edebug($exc->getMessage());
if ($this->exceptions) {
throw $exc;
}
return false;
}
return true;
}
/**
* Return the array of attachments.
* @return array
*/
public function getAttachments()
{
return $this->attachment;
}
/**
* Attach all file, string, and binary attachments to the message.
* Returns an empty string on failure.
* @access protected
* @param string $disposition_type
* @param string $boundary
* @return string
*/
protected function attachAll($disposition_type, $boundary)
{
// Return text of body
$mime = array();
$cidUniq = array();
$incl = array();
// Add all attachments
foreach ($this->attachment as $attachment) {
// Check if it is a valid disposition_filter
if ($attachment[6] == $disposition_type) {
// Check for string attachment
$string = ”;
$path = ”;
$bString = $attachment[5];
if ($bString) {
$string = $attachment[0];
} else {
$path = $attachment[0];
}
$inclhash = md5(serialize($attachment));
if (in_array($inclhash, $incl)) {
continue;
}
$incl[] = $inclhash;
$name = $attachment[2];
$encoding = $attachment[3];
$type = $attachment[4];
$disposition = $attachment[6];
$cid = $attachment[7];
if ($disposition == ‘inline’ && array_key_exists($cid, $cidUniq)) {
continue;
}
$cidUniq[$cid] = true;
$mime[] = sprintf(‘–%s%s’, $boundary, $this->LE);
//Only include a filename property if we have one
if (!empty($name)) {
$mime[] = sprintf(
‘Content-Type: %s; name=”%s”%s’,
$type,
$this->encodeHeader($this->secureHeader($name)),
$this->LE
);
} else {
$mime[] = sprintf(
‘Content-Type: %s%s’,
$type,
$this->LE
);
}
// RFC1341 part 5 says 7bit is assumed if not specified
if ($encoding != ‘7bit’) {
$mime[] = sprintf(‘Content-Transfer-Encoding: %s%s’, $encoding, $this->LE);
}
if ($disposition == ‘inline’) {
$mime[] = sprintf(‘Content-ID: <%s>%s’, $cid, $this->LE);
}
// If a filename contains any of these chars, it should be quoted,
// but not otherwise: RFC2183 & RFC2045 5.1
// Fixes a warning in IETF’s msglint MIME checker
// Allow for bypassing the Content-Disposition header totally
if (!(empty($disposition))) {
$encoded_name = $this->encodeHeader($this->secureHeader($name));
if (preg_match(‘/[ \(\)<>@,;:\\”\/\[\]\?=]/’, $encoded_name)) {
$mime[] = sprintf(
‘Content-Disposition: %s; filename=”%s”%s’,
$disposition,
$encoded_name,
$this->LE . $this->LE
);
} else {
if (!empty($encoded_name)) {
$mime[] = sprintf(
‘Content-Disposition: %s; filename=%s%s’,
$disposition,
$encoded_name,
$this->LE . $this->LE
);
} else {
$mime[] = sprintf(
‘Content-Disposition: %s%s’,
$disposition,
$this->LE . $this->LE
);
}
}
} else {
$mime[] = $this->LE;
}
// Encode as string attachment
if ($bString) {
$mime[] = $this->encodeString($string, $encoding);
if ($this->isError()) {
return ”;
}
$mime[] = $this->LE . $this->LE;
} else {
$mime[] = $this->encodeFile($path, $encoding);
if ($this->isError()) {
return ”;
}
$mime[] = $this->LE . $this->LE;
}
}
}
$mime[] = sprintf(‘–%s–%s’, $boundary, $this->LE);
return implode(”, $mime);
}
/**
* Encode a file attachment in requested format.
* Returns an empty string on failure.
* @param string $path The full path to the file
* @param string $encoding The encoding to use; one of ‘base64’, ‘7bit’, ‘8bit’, ‘binary’, ‘quoted-printable’
* @throws phpmailerException
* @access protected
* @return string
*/
protected function encodeFile($path, $encoding = ‘base64’)
{
try {
if (!is_readable($path)) {
throw new phpmailerException($this->lang(‘file_open’) . $path, self::STOP_CONTINUE);
}
$magic_quotes = get_magic_quotes_runtime();
if ($magic_quotes) {
if (version_compare(PHP_VERSION, ‘5.3.0’, ‘<')) {
set_magic_quotes_runtime(false);
} else {
//Doesn't exist in PHP 5.4, but we don't need to check because
//get_magic_quotes_runtime always returns false in 5.4+
//so it will never get here
ini_set('magic_quotes_runtime', false);
}
}
$file_buffer = file_get_contents($path);
$file_buffer = $this->encodeString($file_buffer, $encoding);
if ($magic_quotes) {
if (version_compare(PHP_VERSION, ‘5.3.0’, ‘<')) {
set_magic_quotes_runtime($magic_quotes);
} else {
ini_set('magic_quotes_runtime', $magic_quotes);
}
}
return $file_buffer;
} catch (Exception $exc) {
$this->setError($exc->getMessage());
return ”;
}
}
/**
* Encode a string in requested format.
* Returns an empty string on failure.
* @param string $str The text to encode
* @param string $encoding The encoding to use; one of ‘base64’, ‘7bit’, ‘8bit’, ‘binary’, ‘quoted-printable’
* @access public
* @return string
*/
public function encodeString($str, $encoding = ‘base64’)
{
$encoded = ”;
switch (strtolower($encoding)) {
case ‘base64’:
$encoded = chunk_split(base64_encode($str), 76, $this->LE);
break;
case ‘7bit’:
case ‘8bit’:
$encoded = $this->fixEOL($str);
// Make sure it ends with a line break
if (substr($encoded, -(strlen($this->LE))) != $this->LE) {
$encoded .= $this->LE;
}
break;
case ‘binary’:
$encoded = $str;
break;
case ‘quoted-printable’:
$encoded = $this->encodeQP($str);
break;
default:
$this->setError($this->lang(‘encoding’) . $encoding);
break;
}
return $encoded;
}
/**
* Encode a header string optimally.
* Picks shortest of Q, B, quoted-printable or none.
* @access public
* @param string $str
* @param string $position
* @return string
*/
public function encodeHeader($str, $position = ‘text’)
{
$matchcount = 0;
switch (strtolower($position)) {
case ‘phrase’:
if (!preg_match(‘/[\200-\377]/’, $str)) {
// Can’t use addslashes as we don’t know the value of magic_quotes_sybase
$encoded = addcslashes($str, “\0..\37\177\\\””);
if (($str == $encoded) && !preg_match(‘/[^A-Za-z0-9!#$%&\’*+\/=?^_`{|}~ -]/’, $str)) {
return ($encoded);
} else {
return (“\”$encoded\””);
}
}
$matchcount = preg_match_all(‘/[^\040\041\043-\133\135-\176]/’, $str, $matches);
break;
/** @noinspection PhpMissingBreakStatementInspection */
case ‘comment’:
$matchcount = preg_match_all(‘/[()”]/’, $str, $matches);
// Intentional fall-through
case ‘text’:
default:
$matchcount += preg_match_all(‘/[\000-\010\013\014\016-\037\177-\377]/’, $str, $matches);
break;
}
//There are no chars that need encoding
if ($matchcount == 0) {
return ($str);
}
$maxlen = 75 – 7 – strlen($this->CharSet);
// Try to select the encoding which should produce the shortest output
if ($matchcount > strlen($str) / 3) {
// More than a third of the content will need encoding, so B encoding will be most efficient
$encoding = ‘B’;
if (function_exists(‘mb_strlen’) && $this->hasMultiBytes($str)) {
// Use a custom function which correctly encodes and wraps long
// multibyte strings without breaking lines within a character
$encoded = $this->base64EncodeWrapMB($str, “\n”);
} else {
$encoded = base64_encode($str);
$maxlen -= $maxlen % 4;
$encoded = trim(chunk_split($encoded, $maxlen, “\n”));
}
} else {
$encoding = ‘Q’;
$encoded = $this->encodeQ($str, $position);
$encoded = $this->wrapText($encoded, $maxlen, true);
$encoded = str_replace(‘=’ . self::CRLF, “\n”, trim($encoded));
}
$encoded = preg_replace(‘/^(.*)$/m’, ‘ =?’ . $this->CharSet . “?$encoding?\\1?=”, $encoded);
$encoded = trim(str_replace(“\n”, $this->LE, $encoded));
return $encoded;
}
/**
* Check if a string contains multi-byte characters.
* @access public
* @param string $str multi-byte text to wrap encode
* @return boolean
*/
public function hasMultiBytes($str)
{
if (function_exists(‘mb_strlen’)) {
return (strlen($str) > mb_strlen($str, $this->CharSet));
} else { // Assume no multibytes (we can’t handle without mbstring functions anyway)
return false;
}
}
/**
* Does a string contain any 8-bit chars (in any charset)?
* @param string $text
* @return boolean
*/
public function has8bitChars($text)
{
return (boolean)preg_match(‘/[\x80-\xFF]/’, $text);
}
/**
* Encode and wrap long multibyte strings for mail headers
* without breaking lines within a character.
* Adapted from a function by paravoid
* @link http://www.php.net/manual/en/function.mb-encode-mimeheader.php#60283
* @access public
* @param string $str multi-byte text to wrap encode
* @param string $linebreak string to use as linefeed/end-of-line
* @return string
*/
public function base64EncodeWrapMB($str, $linebreak = null)
{
$start = ‘=?’ . $this->CharSet . ‘?B?’;
$end = ‘?=’;
$encoded = ”;
if ($linebreak === null) {
$linebreak = $this->LE;
}
$mb_length = mb_strlen($str, $this->CharSet);
// Each line must have length <= 75, including $start and $end
$length = 75 - strlen($start) - strlen($end);
// Average multi-byte ratio
$ratio = $mb_length / strlen($str);
// Base64 has a 4:3 ratio
$avgLength = floor($length * $ratio * .75);
for ($i = 0; $i < $mb_length; $i += $offset) {
$lookBack = 0;
do {
$offset = $avgLength - $lookBack;
$chunk = mb_substr($str, $i, $offset, $this->CharSet);
$chunk = base64_encode($chunk);
$lookBack++;
} while (strlen($chunk) > $length);
$encoded .= $chunk . $linebreak;
}
// Chomp the last linefeed
$encoded = substr($encoded, 0, -strlen($linebreak));
return $encoded;
}
/**
* Encode a string in quoted-printable format.
* According to RFC2045 section 6.7.
* @access public
* @param string $string The text to encode
* @param integer $line_max Number of chars allowed on a line before wrapping
* @return string
* @link http://www.php.net/manual/en/function.quoted-printable-decode.php#89417 Adapted from this comment
*/
public function encodeQP($string, $line_max = 76)
{
// Use native function if it’s available (>= PHP5.3)
if (function_exists(‘quoted_printable_encode’)) {
return quoted_printable_encode($string);
}
// Fall back to a pure PHP implementation
$string = str_replace(
array(‘%20’, ‘%0D%0A.’, ‘%0D%0A’, ‘%’),
array(‘ ‘, “\r\n=2E”, “\r\n”, ‘=’),
rawurlencode($string)
);
return preg_replace(‘/[^\r\n]{‘ . ($line_max – 3) . ‘}[^=\r\n]{2}/’, “$0=\r\n”, $string);
}
/**
* Backward compatibility wrapper for an old QP encoding function that was removed.
* @see PHPMailer::encodeQP()
* @access public
* @param string $string
* @param integer $line_max
* @param boolean $space_conv
* @return string
* @deprecated Use encodeQP instead.
*/
public function encodeQPphp(
$string,
$line_max = 76,
/** @noinspection PhpUnusedParameterInspection */ $space_conv = false
) {
return $this->encodeQP($string, $line_max);
}
/**
* Encode a string using Q encoding.
* @link http://tools.ietf.org/html/rfc2047
* @param string $str the text to encode
* @param string $position Where the text is going to be used, see the RFC for what that means
* @access public
* @return string
*/
public function encodeQ($str, $position = ‘text’)
{
// There should not be any EOL in the string
$pattern = ”;
$encoded = str_replace(array(“\r”, “\n”), ”, $str);
switch (strtolower($position)) {
case ‘phrase’:
// RFC 2047 section 5.3
$pattern = ‘^A-Za-z0-9!*+\/ -‘;
break;
/** @noinspection PhpMissingBreakStatementInspection */
case ‘comment’:
// RFC 2047 section 5.2
$pattern = ‘\(\)”‘;
// intentional fall-through
// for this reason we build the $pattern without including delimiters and []
case ‘text’:
default:
// RFC 2047 section 5.1
// Replace every high ascii, control, =, ? and _ characters
$pattern = ‘\000-\011\013\014\016-\037\075\077\137\177-\377’ . $pattern;
break;
}
$matches = array();
if (preg_match_all(“/[{$pattern}]/”, $encoded, $matches)) {
// If the string contains an ‘=’, make sure it’s the first thing we replace
// so as to avoid double-encoding
$eqkey = array_search(‘=’, $matches[0]);
if (false !== $eqkey) {
unset($matches[0][$eqkey]);
array_unshift($matches[0], ‘=’);
}
foreach (array_unique($matches[0]) as $char) {
$encoded = str_replace($char, ‘=’ . sprintf(‘%02X’, ord($char)), $encoded);
}
}
// Replace every spaces to _ (more readable than =20)
return str_replace(‘ ‘, ‘_’, $encoded);
}
/**
* Add a string or binary attachment (non-filesystem).
* This method can be used to attach ascii or binary data,
* such as a BLOB record from a database.
* @param string $string String attachment data.
* @param string $filename Name of the attachment.
* @param string $encoding File encoding (see $Encoding).
* @param string $type File extension (MIME) type.
* @param string $disposition Disposition to use
* @return void
*/
public function addStringAttachment(
$string,
$filename,
$encoding = ‘base64’,
$type = ”,
$disposition = ‘attachment’
) {
// If a MIME type is not specified, try to work it out from the file name
if ($type == ”) {
$type = self::filenameToType($filename);
}
// Append to $attachment array
$this->attachment[] = array(
0 => $string,
1 => $filename,
2 => basename($filename),
3 => $encoding,
4 => $type,
5 => true, // isStringAttachment
6 => $disposition,
7 => 0
);
}
/**
* Add an embedded (inline) attachment from a file.
* This can include images, sounds, and just about any other document type.
* These differ from ‘regular’ attachments in that they are intended to be
* displayed inline with the message, not just attached for download.
* This is used in HTML messages that embed the images
* the HTML refers to using the $cid value.
* @param string $path Path to the attachment.
* @param string $cid Content ID of the attachment; Use this to reference
* the content when using an embedded image in HTML.
* @param string $name Overrides the attachment name.
* @param string $encoding File encoding (see $Encoding).
* @param string $type File MIME type.
* @param string $disposition Disposition to use
* @return boolean True on successfully adding an attachment
*/
public function addEmbeddedImage($path, $cid, $name = ”, $encoding = ‘base64’, $type = ”, $disposition = ‘inline’)
{
if (!@is_file($path)) {
$this->setError($this->lang(‘file_access’) . $path);
return false;
}
// If a MIME type is not specified, try to work it out from the file name
if ($type == ”) {
$type = self::filenameToType($path);
}
$filename = basename($path);
if ($name == ”) {
$name = $filename;
}
// Append to $attachment array
$this->attachment[] = array(
0 => $path,
1 => $filename,
2 => $name,
3 => $encoding,
4 => $type,
5 => false, // isStringAttachment
6 => $disposition,
7 => $cid
);
return true;
}
/**
* Add an embedded stringified attachment.
* This can include images, sounds, and just about any other document type.
* Be sure to set the $type to an image type for images:
* JPEG images use ‘image/jpeg’, GIF uses ‘image/gif’, PNG uses ‘image/png’.
* @param string $string The attachment binary data.
* @param string $cid Content ID of the attachment; Use this to reference
* the content when using an embedded image in HTML.
* @param string $name
* @param string $encoding File encoding (see $Encoding).
* @param string $type MIME type.
* @param string $disposition Disposition to use
* @return boolean True on successfully adding an attachment
*/
public function addStringEmbeddedImage(
$string,
$cid,
$name = ”,
$encoding = ‘base64’,
$type = ”,
$disposition = ‘inline’
) {
// If a MIME type is not specified, try to work it out from the name
if ($type == ” and !empty($name)) {
$type = self::filenameToType($name);
}
// Append to $attachment array
$this->attachment[] = array(
0 => $string,
1 => $name,
2 => $name,
3 => $encoding,
4 => $type,
5 => true, // isStringAttachment
6 => $disposition,
7 => $cid
);
return true;
}
/**
* Check if an inline attachment is present.
* @access public
* @return boolean
*/
public function inlineImageExists()
{
foreach ($this->attachment as $attachment) {
if ($attachment[6] == ‘inline’) {
return true;
}
}
return false;
}
/**
* Check if an attachment (non-inline) is present.
* @return boolean
*/
public function attachmentExists()
{
foreach ($this->attachment as $attachment) {
if ($attachment[6] == ‘attachment’) {
return true;
}
}
return false;
}
/**
* Check if this message has an alternative body set.
* @return boolean
*/
public function alternativeExists()
{
return !empty($this->AltBody);
}
/**
* Clear queued addresses of given kind.
* @access protected
* @param string $kind ‘to’, ‘cc’, or ‘bcc’
* @return void
*/
public function clearQueuedAddresses($kind)
{
$RecipientsQueue = $this->RecipientsQueue;
foreach ($RecipientsQueue as $address => $params) {
if ($params[0] == $kind) {
unset($this->RecipientsQueue[$address]);
}
}
}
/**
* Clear all To recipients.
* @return void
*/
public function clearAddresses()
{
foreach ($this->to as $to) {
unset($this->all_recipients[strtolower($to[0])]);
}
$this->to = array();
$this->clearQueuedAddresses(‘to’);
}
/**
* Clear all CC recipients.
* @return void
*/
public function clearCCs()
{
foreach ($this->cc as $cc) {
unset($this->all_recipients[strtolower($cc[0])]);
}
$this->cc = array();
$this->clearQueuedAddresses(‘cc’);
}
/**
* Clear all BCC recipients.
* @return void
*/
public function clearBCCs()
{
foreach ($this->bcc as $bcc) {
unset($this->all_recipients[strtolower($bcc[0])]);
}
$this->bcc = array();
$this->clearQueuedAddresses(‘bcc’);
}
/**
* Clear all ReplyTo recipients.
* @return void
*/
public function clearReplyTos()
{
$this->ReplyTo = array();
$this->ReplyToQueue = array();
}
/**
* Clear all recipient types.
* @return void
*/
public function clearAllRecipients()
{
$this->to = array();
$this->cc = array();
$this->bcc = array();
$this->all_recipients = array();
$this->RecipientsQueue = array();
}
/**
* Clear all filesystem, string, and binary attachments.
* @return void
*/
public function clearAttachments()
{
$this->attachment = array();
}
/**
* Clear all custom headers.
* @return void
*/
public function clearCustomHeaders()
{
$this->CustomHeader = array();
}
/**
* Add an error message to the error container.
* @access protected
* @param string $msg
* @return void
*/
protected function setError($msg)
{
$this->error_count++;
if ($this->Mailer == ‘smtp’ and !is_null($this->smtp)) {
$lasterror = $this->smtp->getError();
if (!empty($lasterror[‘error’])) {
$msg .= $this->lang(‘smtp_error’) . $lasterror[‘error’];
if (!empty($lasterror[‘detail’])) {
$msg .= ‘ Detail: ‘. $lasterror[‘detail’];
}
if (!empty($lasterror[‘smtp_code’])) {
$msg .= ‘ SMTP code: ‘ . $lasterror[‘smtp_code’];
}
if (!empty($lasterror[‘smtp_code_ex’])) {
$msg .= ‘ Additional SMTP info: ‘ . $lasterror[‘smtp_code_ex’];
}
}
}
$this->ErrorInfo = $msg;
}
/**
* Return an RFC 822 formatted date.
* @access public
* @return string
* @static
*/
public static function rfcDate()
{
// Set the time zone to whatever the default is to avoid 500 errors
// Will default to UTC if it’s not set properly in php.ini
date_default_timezone_set(@date_default_timezone_get());
return date(‘D, j M Y H:i:s O’);
}
/**
* Get the server hostname.
* Returns ‘localhost.localdomain’ if unknown.
* @access protected
* @return string
*/
protected function serverHostname()
{
$result = ‘localhost.localdomain’;
if (!empty($this->Hostname)) {
$result = $this->Hostname;
} elseif (isset($_SERVER) and array_key_exists(‘SERVER_NAME’, $_SERVER) and !empty($_SERVER[‘SERVER_NAME’])) {
$result = $_SERVER[‘SERVER_NAME’];
} elseif (function_exists(‘gethostname’) && gethostname() !== false) {
$result = gethostname();
} elseif (php_uname(‘n’) !== false) {
$result = php_uname(‘n’);
}
return $result;
}
/**
* Get an error message in the current language.
* @access protected
* @param string $key
* @return string
*/
protected function lang($key)
{
if (count($this->language) < 1) {
$this->setLanguage(‘en’); // set the default language
}
if (array_key_exists($key, $this->language)) {
if ($key == ‘smtp_connect_failed’) {
//Include a link to troubleshooting docs on SMTP connection failure
//this is by far the biggest cause of support questions
//but it’s usually not PHPMailer’s fault.
return $this->language[$key] . ‘ https://github.com/PHPMailer/PHPMailer/wiki/Troubleshooting’;
}
return $this->language[$key];
} else {
//Return the key as a fallback
return $key;
}
}
/**
* Check if an error occurred.
* @access public
* @return boolean True if an error did occur.
*/
public function isError()
{
return ($this->error_count > 0);
}
/**
* Ensure consistent line endings in a string.
* Changes every end of line from CRLF, CR or LF to $this->LE.
* @access public
* @param string $str String to fixEOL
* @return string
*/
public function fixEOL($str)
{
// Normalise to \n
$nstr = str_replace(array(“\r\n”, “\r”), “\n”, $str);
// Now convert LE as needed
if ($this->LE !== “\n”) {
$nstr = str_replace(“\n”, $this->LE, $nstr);
}
return $nstr;
}
/**
* Add a custom header.
* $name value can be overloaded to contain
* both header name and value (name:value)
* @access public
* @param string $name Custom header name
* @param string $value Header value
* @return void
*/
public function addCustomHeader($name, $value = null)
{
if ($value === null) {
// Value passed in as name:value
$this->CustomHeader[] = explode(‘:’, $name, 2);
} else {
$this->CustomHeader[] = array($name, $value);
}
}
/**
* Returns all custom headers.
* @return array
*/
public function getCustomHeaders()
{
return $this->CustomHeader;
}
/**
* Create a message from an HTML string.
* Automatically makes modifications for inline images and backgrounds
* and creates a plain-text version by converting the HTML.
* Overwrites any existing values in $this->Body and $this->AltBody
* @access public
* @param string $message HTML message string
* @param string $basedir baseline directory for path
* @param boolean|callable $advanced Whether to use the internal HTML to text converter
* or your own custom converter @see PHPMailer::html2text()
* @return string $message
*/
public function msgHTML($message, $basedir = ”, $advanced = false)
{
preg_match_all(‘/(src|background)=[“\’](.*)[“\’]/Ui’, $message, $images);
if (array_key_exists(2, $images)) {
foreach ($images[2] as $imgindex => $url) {
// Convert data URIs into embedded images
if (preg_match(‘#^data:(image[^;,]*)(;base64)?,#’, $url, $match)) {
$data = substr($url, strpos($url, ‘,’));
if ($match[2]) {
$data = base64_decode($data);
} else {
$data = rawurldecode($data);
}
$cid = md5($url) . ‘@phpmailer.0′; // RFC2392 S 2
if ($this->addStringEmbeddedImage($data, $cid, ’embed’ . $imgindex, ‘base64’, $match[1])) {
$message = str_replace(
$images[0][$imgindex],
$images[1][$imgindex] . ‘=”cid:’ . $cid . ‘”‘,
$message
);
}
} elseif (substr($url, 0, 4) !== ‘cid:’ && !preg_match(‘#^[A-z]+://#’, $url)) {
// Do not change urls for absolute images (thanks to corvuscorax)
// Do not change urls that are already inline images
$filename = basename($url);
$directory = dirname($url);
if ($directory == ‘.’) {
$directory = ”;
}
$cid = md5($url) . ‘@phpmailer.0’; // RFC2392 S 2
if (strlen($basedir) > 1 && substr($basedir, -1) != ‘/’) {
$basedir .= ‘/’;
}
if (strlen($directory) > 1 && substr($directory, -1) != ‘/’) {
$directory .= ‘/’;
}
if ($this->addEmbeddedImage(
$basedir . $directory . $filename,
$cid,
$filename,
‘base64’,
self::_mime_types((string)self::mb_pathinfo($filename, PATHINFO_EXTENSION))
)
) {
$message = preg_replace(
‘/’ . $images[1][$imgindex] . ‘=[“\’]’ . preg_quote($url, ‘/’) . ‘[“\’]/Ui’,
$images[1][$imgindex] . ‘=”cid:’ . $cid . ‘”‘,
$message
);
}
}
}
}
$this->isHTML(true);
// Convert all message body line breaks to CRLF, makes quoted-printable encoding work much better
$this->Body = $this->normalizeBreaks($message);
$this->AltBody = $this->normalizeBreaks($this->html2text($message, $advanced));
if (empty($this->AltBody)) {
$this->AltBody = ‘To view this email message, open it in a program that understands HTML!’ .
self::CRLF . self::CRLF;
}
return $this->Body;
}
/**
* Convert an HTML string into plain text.
* This is used by msgHTML().
* Note – older versions of this function used a bundled advanced converter
* which was been removed for license reasons in #232
* Example usage:
*
* // Use default conversion
* $plain = $mail->html2text($html);
* // Use your own custom converter
* $plain = $mail->html2text($html, function($html) {
* $converter = new MyHtml2text($html);
* return $converter->get_text();
* });
*
* @param string $html The HTML text to convert
* @param boolean|callable $advanced Any boolean value to use the internal converter,
* or provide your own callable for custom conversion.
* @return string
*/
public function html2text($html, $advanced = false)
{
if (is_callable($advanced)) {
return call_user_func($advanced, $html);
}
return html_entity_decode(
trim(strip_tags(preg_replace(‘/<(head|title|style|script)[^>]*>.*?<\/\\1>/si’, ”, $html))),
ENT_QUOTES,
$this->CharSet
);
}
/**
* Get the MIME type for a file extension.
* @param string $ext File extension
* @access public
* @return string MIME type of file.
* @static
*/
public static function _mime_types($ext = ”)
{
$mimes = array(
‘xl’ => ‘application/excel’,
‘js’ => ‘application/javascript’,
‘hqx’ => ‘application/mac-binhex40’,
‘cpt’ => ‘application/mac-compactpro’,
‘bin’ => ‘application/macbinary’,
‘doc’ => ‘application/msword’,
‘word’ => ‘application/msword’,
‘xlsx’ => ‘application/vnd.openxmlformats-officedocument.spreadsheetml.sheet’,
‘xltx’ => ‘application/vnd.openxmlformats-officedocument.spreadsheetml.template’,
‘potx’ => ‘application/vnd.openxmlformats-officedocument.presentationml.template’,
‘ppsx’ => ‘application/vnd.openxmlformats-officedocument.presentationml.slideshow’,
‘pptx’ => ‘application/vnd.openxmlformats-officedocument.presentationml.presentation’,
‘sldx’ => ‘application/vnd.openxmlformats-officedocument.presentationml.slide’,
‘docx’ => ‘application/vnd.openxmlformats-officedocument.wordprocessingml.document’,
‘dotx’ => ‘application/vnd.openxmlformats-officedocument.wordprocessingml.template’,
‘xlam’ => ‘application/vnd.ms-excel.addin.macroEnabled.12’,
‘xlsb’ => ‘application/vnd.ms-excel.sheet.binary.macroEnabled.12’,
‘class’ => ‘application/octet-stream’,
‘dll’ => ‘application/octet-stream’,
‘dms’ => ‘application/octet-stream’,
‘exe’ => ‘application/octet-stream’,
‘lha’ => ‘application/octet-stream’,
‘lzh’ => ‘application/octet-stream’,
‘psd’ => ‘application/octet-stream’,
‘sea’ => ‘application/octet-stream’,
‘so’ => ‘application/octet-stream’,
‘oda’ => ‘application/oda’,
‘pdf’ => ‘application/pdf’,
‘ai’ => ‘application/postscript’,
‘eps’ => ‘application/postscript’,
‘ps’ => ‘application/postscript’,
‘smi’ => ‘application/smil’,
‘smil’ => ‘application/smil’,
‘mif’ => ‘application/vnd.mif’,
‘xls’ => ‘application/vnd.ms-excel’,
‘ppt’ => ‘application/vnd.ms-powerpoint’,
‘wbxml’ => ‘application/vnd.wap.wbxml’,
‘wmlc’ => ‘application/vnd.wap.wmlc’,
‘dcr’ => ‘application/x-director’,
‘dir’ => ‘application/x-director’,
‘dxr’ => ‘application/x-director’,
‘dvi’ => ‘application/x-dvi’,
‘gtar’ => ‘application/x-gtar’,
‘php3’ => ‘application/x-httpd-php’,
‘php4’ => ‘application/x-httpd-php’,
‘php’ => ‘application/x-httpd-php’,
‘phtml’ => ‘application/x-httpd-php’,
‘phps’ => ‘application/x-httpd-php-source’,
‘swf’ => ‘application/x-shockwave-flash’,
‘sit’ => ‘application/x-stuffit’,
‘tar’ => ‘application/x-tar’,
‘tgz’ => ‘application/x-tar’,
‘xht’ => ‘application/xhtml+xml’,
‘xhtml’ => ‘application/xhtml+xml’,
‘zip’ => ‘application/zip’,
‘mid’ => ‘audio/midi’,
‘midi’ => ‘audio/midi’,
‘mp2’ => ‘audio/mpeg’,
‘mp3’ => ‘audio/mpeg’,
‘mpga’ => ‘audio/mpeg’,
‘aif’ => ‘audio/x-aiff’,
‘aifc’ => ‘audio/x-aiff’,
‘aiff’ => ‘audio/x-aiff’,
‘ram’ => ‘audio/x-pn-realaudio’,
‘rm’ => ‘audio/x-pn-realaudio’,
‘rpm’ => ‘audio/x-pn-realaudio-plugin’,
‘ra’ => ‘audio/x-realaudio’,
‘wav’ => ‘audio/x-wav’,
‘bmp’ => ‘image/bmp’,
‘gif’ => ‘image/gif’,
‘jpeg’ => ‘image/jpeg’,
‘jpe’ => ‘image/jpeg’,
‘jpg’ => ‘image/jpeg’,
‘png’ => ‘image/png’,
‘tiff’ => ‘image/tiff’,
‘tif’ => ‘image/tiff’,
’eml’ => ‘message/rfc822’,
‘css’ => ‘text/css’,
‘html’ => ‘text/html’,
‘htm’ => ‘text/html’,
‘shtml’ => ‘text/html’,
‘log’ => ‘text/plain’,
‘text’ => ‘text/plain’,
‘txt’ => ‘text/plain’,
‘rtx’ => ‘text/richtext’,
‘rtf’ => ‘text/rtf’,
‘vcf’ => ‘text/vcard’,
‘vcard’ => ‘text/vcard’,
‘xml’ => ‘text/xml’,
‘xsl’ => ‘text/xml’,
‘mpeg’ => ‘video/mpeg’,
‘mpe’ => ‘video/mpeg’,
‘mpg’ => ‘video/mpeg’,
‘mov’ => ‘video/quicktime’,
‘qt’ => ‘video/quicktime’,
‘rv’ => ‘video/vnd.rn-realvideo’,
‘avi’ => ‘video/x-msvideo’,
‘movie’ => ‘video/x-sgi-movie’
);
if (array_key_exists(strtolower($ext), $mimes)) {
return $mimes[strtolower($ext)];
}
return ‘application/octet-stream’;
}
/**
* Map a file name to a MIME type.
* Defaults to ‘application/octet-stream’, i.e.. arbitrary binary data.
* @param string $filename A file name or full path, does not need to exist as a file
* @return string
* @static
*/
public static function filenameToType($filename)
{
// In case the path is a URL, strip any query string before getting extension
$qpos = strpos($filename, ‘?’);
if (false !== $qpos) {
$filename = substr($filename, 0, $qpos);
}
$pathinfo = self::mb_pathinfo($filename);
return self::_mime_types($pathinfo[‘extension’]);
}
/**
* Multi-byte-safe pathinfo replacement.
* Drop-in replacement for pathinfo(), but multibyte-safe, cross-platform-safe, old-version-safe.
* Works similarly to the one in PHP >= 5.2.0
* @link http://www.php.net/manual/en/function.pathinfo.php#107461
* @param string $path A filename or path, does not need to exist as a file
* @param integer|string $options Either a PATHINFO_* constant,
* or a string name to return only the specified piece, allows ‘filename’ to work on PHP < 5.2
* @return string|array
* @static
*/
public static function mb_pathinfo($path, $options = null)
{
$ret = array('dirname' => ”, ‘basename’ => ”, ‘extension’ => ”, ‘filename’ => ”);
$pathinfo = array();
if (preg_match(‘%^(.*?)[\\\\/]*(([^/\\\\]*?)(\.([^\.\\\\/]+?)|))[\\\\/\.]*$%im’, $path, $pathinfo)) {
if (array_key_exists(1, $pathinfo)) {
$ret[‘dirname’] = $pathinfo[1];
}
if (array_key_exists(2, $pathinfo)) {
$ret[‘basename’] = $pathinfo[2];
}
if (array_key_exists(5, $pathinfo)) {
$ret[‘extension’] = $pathinfo[5];
}
if (array_key_exists(3, $pathinfo)) {
$ret[‘filename’] = $pathinfo[3];
}
}
switch ($options) {
case PATHINFO_DIRNAME:
case ‘dirname’:
return $ret[‘dirname’];
case PATHINFO_BASENAME:
case ‘basename’:
return $ret[‘basename’];
case PATHINFO_EXTENSION:
case ‘extension’:
return $ret[‘extension’];
case PATHINFO_FILENAME:
case ‘filename’:
return $ret[‘filename’];
default:
return $ret;
}
}
/**
* Set or reset instance properties.
* You should avoid this function – it’s more verbose, less efficient, more error-prone and
* harder to debug than setting properties directly.
* Usage Example:
* `$mail->set(‘SMTPSecure’, ‘tls’);`
* is the same as:
* `$mail->SMTPSecure = ‘tls’;`
* @access public
* @param string $name The property name to set
* @param mixed $value The value to set the property to
* @return boolean
* @TODO Should this not be using the __set() magic function?
*/
public function set($name, $value = ”)
{
if (property_exists($this, $name)) {
$this->$name = $value;
return true;
} else {
$this->setError($this->lang(‘variable_set’) . $name);
return false;
}
}
/**
* Strip newlines to prevent header injection.
* @access public
* @param string $str
* @return string
*/
public function secureHeader($str)
{
return trim(str_replace(array(“\r”, “\n”), ”, $str));
}
/**
* Normalize line breaks in a string.
* Converts UNIX LF, Mac CR and Windows CRLF line breaks into a single line break format.
* Defaults to CRLF (for message bodies) and preserves consecutive breaks.
* @param string $text
* @param string $breaktype What kind of line break to use, defaults to CRLF
* @return string
* @access public
* @static
*/
public static function normalizeBreaks($text, $breaktype = “\r\n”)
{
return preg_replace(‘/(\r\n|\r|\n)/ms’, $breaktype, $text);
}
/**
* Set the public and private key files and password for S/MIME signing.
* @access public
* @param string $cert_filename
* @param string $key_filename
* @param string $key_pass Password for private key
* @param string $extracerts_filename Optional path to chain certificate
*/
public function sign($cert_filename, $key_filename, $key_pass, $extracerts_filename = ”)
{
$this->sign_cert_file = $cert_filename;
$this->sign_key_file = $key_filename;
$this->sign_key_pass = $key_pass;
$this->sign_extracerts_file = $extracerts_filename;
}
/**
* Quoted-Printable-encode a DKIM header.
* @access public
* @param string $txt
* @return string
*/
public function DKIM_QP($txt)
{
$line = ”;
for ($i = 0; $i < strlen($txt); $i++) {
$ord = ord($txt[$i]);
if (((0x21 <= $ord) && ($ord <= 0x3A)) || $ord == 0x3C || ((0x3E <= $ord) && ($ord <= 0x7E))) {
$line .= $txt[$i];
} else {
$line .= '=' . sprintf('%02X', $ord);
}
}
return $line;
}
/**
* Generate a DKIM signature.
* @access public
* @param string $signHeader
* @throws phpmailerException
* @return string
*/
public function DKIM_Sign($signHeader)
{
if (!defined('PKCS7_TEXT')) {
if ($this->exceptions) {
throw new phpmailerException($this->lang(‘extension_missing’) . ‘openssl’);
}
return ”;
}
$privKeyStr = file_get_contents($this->DKIM_private);
if ($this->DKIM_passphrase != ”) {
$privKey = openssl_pkey_get_private($privKeyStr, $this->DKIM_passphrase);
} else {
$privKey = $privKeyStr;
}
if (openssl_sign($signHeader, $signature, $privKey)) {
return base64_encode($signature);
}
return ”;
}
/**
* Generate a DKIM canonicalization header.
* @access public
* @param string $signHeader Header
* @return string
*/
public function DKIM_HeaderC($signHeader)
{
$signHeader = preg_replace(‘/\r\n\s+/’, ‘ ‘, $signHeader);
$lines = explode(“\r\n”, $signHeader);
foreach ($lines as $key => $line) {
list($heading, $value) = explode(‘:’, $line, 2);
$heading = strtolower($heading);
$value = preg_replace(‘/\s+/’, ‘ ‘, $value); // Compress useless spaces
$lines[$key] = $heading . ‘:’ . trim($value); // Don’t forget to remove WSP around the value
}
$signHeader = implode(“\r\n”, $lines);
return $signHeader;
}
/**
* Generate a DKIM canonicalization body.
* @access public
* @param string $body Message Body
* @return string
*/
public function DKIM_BodyC($body)
{
if ($body == ”) {
return “\r\n”;
}
// stabilize line endings
$body = str_replace(“\r\n”, “\n”, $body);
$body = str_replace(“\n”, “\r\n”, $body);
// END stabilize line endings
while (substr($body, strlen($body) – 4, 4) == “\r\n\r\n”) {
$body = substr($body, 0, strlen($body) – 2);
}
return $body;
}
/**
* Create the DKIM header and body in a new message header.
* @access public
* @param string $headers_line Header lines
* @param string $subject Subject
* @param string $body Body
* @return string
*/
public function DKIM_Add($headers_line, $subject, $body)
{
$DKIMsignatureType = ‘rsa-sha1’; // Signature & hash algorithms
$DKIMcanonicalization = ‘relaxed/simple’; // Canonicalization of header/body
$DKIMquery = ‘dns/txt’; // Query method
$DKIMtime = time(); // Signature Timestamp = seconds since 00:00:00 – Jan 1, 1970 (UTC time zone)
$subject_header = “Subject: $subject”;
$headers = explode($this->LE, $headers_line);
$from_header = ”;
$to_header = ”;
$current = ”;
foreach ($headers as $header) {
if (strpos($header, ‘From:’) === 0) {
$from_header = $header;
$current = ‘from_header’;
} elseif (strpos($header, ‘To:’) === 0) {
$to_header = $header;
$current = ‘to_header’;
} else {
if (!empty($$current) && strpos($header, ‘ =?’) === 0) {
$$current .= $header;
} else {
$current = ”;
}
}
}
$from = str_replace(‘|’, ‘=7C’, $this->DKIM_QP($from_header));
$to = str_replace(‘|’, ‘=7C’, $this->DKIM_QP($to_header));
$subject = str_replace(
‘|’,
‘=7C’,
$this->DKIM_QP($subject_header)
); // Copied header fields (dkim-quoted-printable)
$body = $this->DKIM_BodyC($body);
$DKIMlen = strlen($body); // Length of body
$DKIMb64 = base64_encode(pack(‘H*’, sha1($body))); // Base64 of packed binary SHA-1 hash of body
if (” == $this->DKIM_identity) {
$ident = ”;
} else {
$ident = ‘ i=’ . $this->DKIM_identity . ‘;’;
}
$dkimhdrs = ‘DKIM-Signature: v=1; a=’ .
$DKIMsignatureType . ‘; q=’ .
$DKIMquery . ‘; l=’ .
$DKIMlen . ‘; s=’ .
$this->DKIM_selector .
“;\r\n” .
“\tt=” . $DKIMtime . ‘; c=’ . $DKIMcanonicalization . “;\r\n” .
“\th=From:To:Subject;\r\n” .
“\td=” . $this->DKIM_domain . ‘;’ . $ident . “\r\n” .
“\tz=$from\r\n” .
“\t|$to\r\n” .
“\t|$subject;\r\n” .
“\tbh=” . $DKIMb64 . “;\r\n” .
“\tb=”;
$toSign = $this->DKIM_HeaderC(
$from_header . “\r\n” .
$to_header . “\r\n” .
$subject_header . “\r\n” .
$dkimhdrs
);
$signed = $this->DKIM_Sign($toSign);
return $dkimhdrs . $signed . “\r\n”;
}
/**
* Detect if a string contains a line longer than the maximum line length allowed.
* @param string $str
* @return boolean
* @static
*/
public static function hasLineLongerThanMax($str)
{
//+2 to include CRLF line break for a 1000 total
return (boolean)preg_match(‘/^(.{‘.(self::MAX_LINE_LENGTH + 2).’,})/m’, $str);
}
/**
* Allows for public read access to ‘to’ property.
* @note: Before the send() call, queued addresses (i.e. with IDN) are not yet included.
* @access public
* @return array
*/
public function getToAddresses()
{
return $this->to;
}
/**
* Allows for public read access to ‘cc’ property.
* @note: Before the send() call, queued addresses (i.e. with IDN) are not yet included.
* @access public
* @return array
*/
public function getCcAddresses()
{
return $this->cc;
}
/**
* Allows for public read access to ‘bcc’ property.
* @note: Before the send() call, queued addresses (i.e. with IDN) are not yet included.
* @access public
* @return array
*/
public function getBccAddresses()
{
return $this->bcc;
}
/**
* Allows for public read access to ‘ReplyTo’ property.
* @note: Before the send() call, queued addresses (i.e. with IDN) are not yet included.
* @access public
* @return array
*/
public function getReplyToAddresses()
{
return $this->ReplyTo;
}
/**
* Allows for public read access to ‘all_recipients’ property.
* @note: Before the send() call, queued addresses (i.e. with IDN) are not yet included.
* @access public
* @return array
*/
public function getAllRecipientAddresses()
{
return $this->all_recipients;
}
/**
* Perform a callback.
* @param boolean $isSent
* @param array $to
* @param array $cc
* @param array $bcc
* @param string $subject
* @param string $body
* @param string $from
*/
protected function doCallback($isSent, $to, $cc, $bcc, $subject, $body, $from)
{
if (!empty($this->action_function) && is_callable($this->action_function)) {
$params = array($isSent, $to, $cc, $bcc, $subject, $body, $from);
call_user_func_array($this->action_function, $params);
}
}
}
/**
* PHPMailer exception handler
* @package PHPMailer
*/
class phpmailerException extends Exception
{
/**
* Prettify error message output
* @return string
*/
public function errorMessage()
{
$errorMsg = ‘‘ . $this->getMessage() . “
\n”;
return $errorMsg;
}
}
print ‘
Leaf PHPMailer
‘;
print ‘
‘;
print ‘
Leaf PHPMailer ‘.$leaf[‘version’].’
Server Information
- ServerIP : ‘.$_SERVER[‘SERVER_ADDR’].’
HELP
- [-email-] : Reciver Email
- [-time-] : Date and Time (‘.date(“m/d/Y h:i:s a”, time()).’)
- [-emailuser-] : Email User (emailuser@emaildomain)
- [-randomstring-] : Random string (0-9,a-z)
- [-randomnumber-] : Random number (0-9)
- [-randomletters-] : Random Letters(a-z)
- [-randommd5-] : Random MD5
example
Reciver Email = user@domain.com
- hello [-emailuser-] -> hello user
- your code is [-randommd5-] -> your code is e10adc3949ba59abbe56e057f20f883e
‘;
if($_POST[‘action’]==”send”){
print ‘
‘;
$maillist=explode(“\r\n”, $emailList);
$n=count($maillist);
$x =1;
foreach ($maillist as $email ) {
print ‘
[‘.$x.’/’.$n.’]
‘.$email.’
‘;
if(!leafMailCheck($email)) {
print ‘
Incorrect Email
‘;
print “
\r\n”;
}
else {
$mail = new PHPMailer;
$mail->setFrom(leafClear($senderEmail,$email),leafClear($senderName,$email));
$mail->addReplyTo(leafClear($replyTo,$email));
$mail->addAddress($email);
$mail->Subject = leafClear($subject,$email);
$mail->Body = leafClear($messageLetter,$email);
$mail->CharSet = $encode;
for($i=0; $iAddAttachment($_FILES[‘attachment’][‘tmp_name’][$i],$_FILES[‘attachment’][‘name’][$i]);
}
}
if($messageType==1){$mail->IsHTML(true);}
else {$mail->IsHTML(false);}
if (!$mail->send()) {
echo ‘
‘.$mail->ErrorInfo.’
‘;
}
else {
echo ‘
Ok
‘;
}
print “
\r\n”;
}
$x++;
for($k = 0; $k < 40000; $k++) {echo ' ';}
}
}
print '‘;
?>
-
广告合作
-
QQ群号:707632017
温馨提示:
1、本网站发布的内容(图片、视频和文字)以原创、转载和分享网络内容为主,如果涉及侵权请尽快告知,我们将会在第一时间删除。邮箱:2942802716#qq.com(#改为@)。
2、本站原创内容未经允许不得转裁,转载请注明出处“站长百科”和原文地址。